What causes the need to lay the gas supply system to the plant, to the factory, to the plant or to the power plant? First of all, gasification of industrial facilities provides them with uninterrupted heating.
Secondly, it is the possibility of continuous supply of hot water. Thirdly, gas can be used as fuel in various technological processes, and some enterprises need steam supply.
We will talk about how the organization of water supply systems at manufacturing enterprises is carried out. The article we presented describes in detail the options for installing gas supply systems and their popular varieties. The costs allocated to the construction of main gas supply circuits are considered.
Gaseous fuel options
The main consumers of gas are factories and power plants. They use gas as an efficient fuel. The enterprises of the chemical, metallurgical, and engineering industries also use gas in the implementation of technological processes. In cities, the food industry is actively switching to gas.
Gas supply to an industrial enterprise, depending on the sources of fuel, can be carried out in various ways. Large industrial enterprises use their own gas sources. In most cases, this is generator, coke or blast furnace gas. During the processing of coal, artificial gases are emitted: lighter gas, coke oven gas and others.
The interaction of chemical elements in the production processes determines the evolution of gas as a by-product. If insufficiency and lack of resources are detected, then industrial enterprises are often connected to the main gas pipeline, where natural gas is supplied: standard or associated petroleum.
Coking or pyrolysis of coal is carried out by heating it to very high temperatures. The furnaces in which this process takes place do not let oxygen in. As a result, in addition to a number of by-products, gaseous compounds are also obtained.
Natural gas is considered the best fuel for gas supply.
This is due to the following advantages:
- low price for natural gas;
- high calorific value;
- the ability to quickly and cheaply transport;
- a small amount of harmful emissions into the air basin during combustion;
- full automation of combustion.
Gas wins against other types of fuel due to the fact that its supply is mainly carried out through pipelines.
This allows owners of industrial enterprises to free up land intended for solid fuels and their waste. There is also no need to have vehicles for the constant transportation of large volumes of fuel.
Types of gas supply systems
Industrial enterprises can be gasified by several schemes, which differ depending on the design conditions of each individual object.
The use of a specific gas supply scheme or the combination and combination of several schemes is determined by individual design conditions. The combination of circuits is usually designed in cases where the gas demand in the workshops of the enterprise varies greatly
Single-stage gas supply systems are designed in cases where:
- it is planned to connect the enterprise to the city gas pipeline with a low level of pressure;
- It is envisaged to connect the industrial enterprise to the city gas network through a central gas control station, if necessary, to ensure low pressure in the object’s gas pipeline;
- We are developing the connection of an industrial facility to city networks by connecting to a central system through a gas distribution point with a future average level of gas pressure in the pipes.
Installation of two-stage systems is provided in the following cases:
- when connecting workshop gas distribution units of an industrial facility to the city gas main through medium and low pressure distribution points in workshop gas pipelines;
- when connecting workshop gas distribution units of an industrial enterprise to a medium-pressure urban gas network with an average pressure level in workshop gas pipelines;
- when connecting workshop gas distribution units to the central gas distribution point of city networks with an average pressure level in inter-workshop gas pipelines and a low level of pressure in workshop gas pipelines;
- when connecting workshop gas distribution units to the central gas distribution point of city networks with an average gas pressure level in inter-workshop gas pipelines and an average pressure level in workshop gas pipelines.
When designing a gas supply system for a separate industrial enterprise, engineers often encounter the need to combine concepts for the specific conditions of the gasified facility.
Centralized gasification of industrial enterprises
Industrial gas supply systems include a number of components.
The main components include:
- gas pipelines entering the organization's territory;
- network of inter-workshop gas pipelines;
- internal workshop gas supply system;
- regulatory points and installations;
- gas flow measuring instruments;
- gas pipelines for gas consuming devices.
Gasification by connecting to the main gas pipeline is characteristic of the largest plants - the flagships of industrial production. The vast majority of small and medium-sized industry representatives use urban gas supply services.
The pipeline is carried out strictly in accordance with the technical solution in the project. It takes into account all the features and individual conditions for laying pipes. As a bearing element during laying, mainly earth embankments or supports are used.
Gas supply to industrial facilities comes from a looped distribution network. There are three levels of pressure: high, medium and low. Most plants and plants are powered by high and medium pressure air defense systems. And only a small number of small urban industrial facilities have enough low pressure.
Two inlet pipelines from different highways are connected to large industrial facilities, which are then combined on the area of the facility. Pipelines transporting gas to an object are made land or underground.
Onshore pipelines are a more popular option, as they are easier to inspect and maintain. In the event of gas leaks, such pipelines are not so dangerous. They are also not subject to a constant process of corrosion.
They are installed on supports or carried along fire-resistant outer walls and structures. The laying height is regulated by regulatory documents.
Terrestrial gas pipelines transport fuel under conditions of variable thermal conditions. They are allowed to be installed along the outer walls of buildings in which there are production facilities classified as categories G and D. It is also possible to lay fireproof rooms of the first and second degree of fire resistance
Several valves or valves with a lens compensator are placed throughout the pipe: one outside the industrial building and several, depending on the needs of the enterprise, directly at the site.
At large plants, each inter-workshop gas pipeline has its own separately developed scheme, which is prepared depending on the level of gas consumption. Schemes of inter-workshop gas pipelines by and large differ in the number, location and type of gas control points.
In small factories, powered by a low-pressure ring distribution network, gas control points are not usually installed, but installation of a gas flow metering point is required.
If the pressure level is higher than necessary, then a central gas distribution point is installed on the territory of the industrial facility. The device reduces the pressure to the required level at the enterprise.
If necessary, in some workshop providing a different pressure value, a gas distribution unit is installed in it, with which you can adjust the pressure indicators.
Modern engineering developments allow the introduction of new equipment. Control of gas supply and its distribution through the system pipes is greatly simplified, which helps to avoid adverse consequences in cases of leaks and unforeseen accidents
If an individual level of pressure is needed in each workshop at an enterprise, then it is possible to carry out a gas pipeline to each individual workshop. For this, a gas distribution unit must first be installed.
Gas consumption at various enterprises is uneven and depends on many factors. Usually, increased resource consumption occurs in the daytime, when the main technological processes are carried out in factories.
On weekdays, at most industrial enterprises, gas consumption is greater than on weekends. However, some factories operate without technological downtime.
To calculate gas consumption it is important to consider seasonality. In winter, in colder regions, resource consumption is several times higher than in summer. Due to the unevenness of gas consumption, a number of problems arise.
In the summer, remote gas pipelines do not operate at full capacity, and in the winter, there is a need to reduce or completely stop the gas supply to individual sections.
Thanks to the possibility of choosing a suitable gas holder, industrial enterprises have the opportunity to organize an efficient and uninterrupted gas supply. When buying a gas tank, you should pay attention to its compliance with European quality standards
In the construction of autonomous gas supply networks for enterprises located in a terrain inaccessible for laying a gas pipeline, special containers are used - gas holders intended for industrial facilities. This option also applies if the organization of a standard gas pipeline is unprofitable.
In order to fully use the resource in the summer, buffer consumers are installed that can run on several types of fuel. They are designed for a quick transition of the unit from the consumption of one resource to another.
Autonomous gas supply to organizations
If an entrepreneur is wondering how to gasify his enterprise, one of the possible solutions is joining a centralized gas supply. However, the law also provides for the use of autonomous gas sources.
The advantages of autonomous gasification include a reduction in gas consumption from the common network. The costs of installing an autonomous gas storage, as well as the cost of installing a gas tank in a suburban area, are significantly lower than the costs of laying pipes and connecting to a centralized highway.
Such systems are used for the following purposes:
- providing cogeneration plants with necessary fuel for efficient generation of electric and thermal energy;
- fuel supply to gas infrared heaters;
- ensuring continuous operation of gas generators;
- providing the necessary resource for gas-fired boiler houses.
At industrial enterprises, gas can be used as the main energy source or as a resource to ensure the operation of the backup energy supply scheme. In the second case, gas holders are purchased, which should be installed strictly in accordance with the standards of GOST and SNiP.
The bodies of gas holders are covered with a protective layer that prevents the processes of electrochemical corrosion.
Most types of gas holders are designed to be located underground. This advantageous solution allows you to save production space and use the land area for other needs. Underground installations are covered with a protective layer provided at the production stage
Among the necessary equipment for conducting an autonomous gas system at the facility, there are:
- Liquid or electric evaporators, which are additionally equipped with a regulatory group. They increase design productivity.
- Mixers installed on pipelines of enterprises connected to the central highway;
- Drain assembly allowing condensate to be removed;
- Gas pipelines for various phases of gas mixtures;
- Condensate collectors collecting and draining condensate from the pipeline to evaporators or devices for its disposal;
- Management system designed to automate the control of the tank farm.
Tank installations have the following working scheme:
- Liquid gas filling;
- Storage of liquid fuel under pressure in a tank;
- The supply of a liquid phase to the evaporator;
- Conversion of a liquid phase to vapor;
- Steam supply to equipment and burners.
Gas is supplied to the evaporator using pumps. The reservoir complex must be equipped with an automatic control system.
Among the shortcomings of underground gas holders, the high cost of their installation and possible risks are highlighted. If the system is not sufficiently insulated, it may freeze. There are also unscrupulous suppliers who fill in the raw gas. Working with gas always requires close attention.
The procedure for gasification of an industrial enterprise does not depend on whether gas is used as the main energy source or as fuel for reserve energy supply. For gasification of the organization, it is necessary to carry out a number of consecutive measures.
Even at the design stage, the concept of “gasification of an enterprise” is specified and specified. Thus, gasification is indicated sequentially in the documentation: equipment, communication systems, workshop and enterprise.
First of all, you should apply to the design institute. There, heat engineering calculations are carried out and the need for a gasified object in fuel is determined depending on the technological conditions at the enterprise.
The next step is to send a letter to the gas distribution organization of the region. It should contain a request for a certificate confirming the technical feasibility of connecting an industrial facility to regional gas networks.
The listed set of papers should be accompanied by a situational plan and heat engineering calculation carried out at the design institute.
A prerequisite for a gas supply system is the installation of a gas metering point. The displayed fuel consumption will not only allow you to track and calculate indicators and future expenses, but will also help to identify a leak in places inaccessible to the eye
The regional gas distribution organization also receives a certificate of technical feasibility to connect the company to gas distribution networks.
In order to obtain technical conditions for gasification in the design and technical department of the design organization developing the project and estimate, it is necessary to obtain permission to use natural gas as fuel.
A tripartite agreement is also signed between the gas supplier, the consumer and the gas distribution organization. After receiving all the documents and permissions, installation and installation of all systems and equipment is carried out and gas is directly launched.
Gasification service costs
The use of natural gas is economical, uninterrupted supply and high environmental friendliness. When the owners and decision-makers of industrial enterprises, factories, factories realize the future benefits of gasification, they are wondering about the cost of gas pipeline services.
Owners of private households ask similar questions, whose connection costs are no less worrying than the heads and board of directors of enterprises. In essence, the cost items for private and commercial consumers are similar, the difference mainly lies in tariff rates.
A gas pipeline is only possible if there is confirmation of technical feasibility from a gas distribution organization. After the verdict on the admissibility of the connection to the gas main is drawn up, an estimate for the execution of work
On the one hand, the necessary documentation can be collected personally. In this case, you will have to face documentation problems, spend personal time, money and delve into all the processes. Direct installation of gas systems should be carried out in accordance with the norms and rules approved by state bodies.
To carry out such work can only companies specializing in the installation of gas pipelines. You can use the services of small teams, contractors or teams of large services.
On the other hand, a number of companies operate on the market, providing comprehensive services for the gas supply of industrial and commercial enterprises. Such organizations for a predetermined amount will carry out the whole range of works, including documentation, procurement of equipment and installation of all systems.
High-quality comprehensive gas pipeline services with phased support from design to the launch of all systems are provided only by certified companies. When contacting incompetent specialists, the progress of work may stall even at the initial stage
Of course, the services of such companies will cost a lot. However, they guarantee high quality work and fulfill orders as soon as possible.
The cost of services of specialized companies varies depending on a number of factors:
- installed equipment power, measured in kW;
- the number of facilities in the enterprise that will be gasified;
- the presence and quantity of technological gas consuming devices;
- the designed length of the gas pipeline, measured in meters;
- geological conditions of the route along which the pipeline will be held.
In order to save on gasification, it is recommended to adhere to the following tips:
- warming of gas-conducting structures reduces heat loss of heated objects and the necessary power of equipment;
- installation of modern heating systems pays off in a short time due to their high energy efficiency;
- in the presence of industrial facilities in the neighborhood, it is worth thinking about the joint design of gas supply routes;
- calculate the most optimal route and method of laying gas paths.
On average, it takes from 12 to 15 months to complete all stages from design to the launch of gas supply systems.
How to choose and install a gas holder:
Laying a gas pipeline underground:
Conducting a gas pipeline and adjacent gas systems to industrial facilities is a complex and multi-stage process. For its successful implementation, many nuances and features should be considered. It will also require serious financial investments for the purchase of equipment and payment for installation work.
However, the money spent pays off in the near future. This is due to the low cost of natural gas, good value for money and high environmental friendliness. The company will not need to purchase expensive filtering equipment so as not to pollute the environment.
There are several possible problems that the enterprise will have to face. It may be difficult to obtain agreements and licenses. It is also necessary to obtain the consent of the owners of the land on which the pipeline will be laid. All problems are easily solved when choosing the right approach.
Since working with gas is primarily responsibility and qualification, it is important to choose a good contractor. It is recommended to cooperate with companies with positive experience in laying gas communications. The company must know all the intricacies of work and be aware of its responsibility.
In difficult situations, you have to cooperate with state oversight bodies and fulfill their requirements and recommendations. It is also possible to make adjustments during the installation and installation process.