Living in a private house requires an autonomous sewage system. It consists of an internal wiring, an external pipeline, and a drive (or VOC). For residents of summer cottages or houses of temporary (seasonal) residence, a cesspool remains the best way to collect and partially process waste.
We will tell independent craftsmen how a cesspool is constructed from a barrel. This is an extremely simple option, requiring a minimum of funds in construction. Based on our recommendations, you can easily build an autonomous sewer with a cesspool.
How is a cesspool different from a septic tank?
Previously, the word “septic tank” was unknown, and the cesspool played the role of the only possible place for waste collection.
Structurally, all cesspools were similar, the difference was the presence or absence of any capacity. Often an ordinary pit was pulled out in the ground, and a wooden “birdhouse” house was built above it. Such street toilets can still be found in old summer cottages.
The modern version of the toilet, which is located in the courtyard, is a beautiful house, neatly painted and decorated with flowers. Under it is buried a sewer tank with a neck for pumping
A pit without a sealed container is an environmental threat to the garden plot. If the owners of the house are interested in the cleanliness of the soil and water, they must place a tank in the pit for cessation.
Previously, it was made of boards or bricks, now it is made of concrete rings or monolithic concrete. Often use barrels, metal or plastic, specially designed for arranging sewers.
Even a large sealed tank of modified plastic is just a drive that quickly fills up and requires regular pumping. For this reason, cesspools are absolutely not suitable for family cottages.
Image Gallery
Photo from
Barrel country sewerage
Barrel as storage tank
The use of plastic containers
Eurocubes as a cesspool
To make the sewer system more efficient, a septic tank is installed instead of the cesspool, which not only collects sewage, but partially cleans it. Pumping out solid sediment from a septic tank is much less common than from a pit.
Volumetric container made of modified plastic is the best option for a cesspool. A large tank with a volume of 6-8 m³ will easily replace 3-4 standard metal barrels
The installation of biological treatment plants is recognized as the most perfect way of collecting and processing sewer masses. Thanks to the special design and the principle of operation, a unit consisting of several sections purifies the liquid up to 98%.
After such a thorough filtration, the water enters the reservoir, into the ground or into the storage well for household needs.
Advantages of a Barrel Rack
If for material or other reasons you cannot install a septic tank (a more efficient sewage treatment plant), you will have to equip a cesspool.
Immediately it is worth abandoning the option that does not involve the installation of capacity. Sewer drains that have not undergone the decay process and immediately fall into the ground and groundwater contain dangerous microorganisms. Over time, they are able to contaminate fertile soil, and water in the well, and cultivated plants in the garden.
Therefore, before the device of the cesspool is necessary to determine the type of tank, that is, choose one of the following options:
- brick well;
- well of concrete rings;
- rubber tire pit;
- monolithic concrete tank;
- plastic container or metal barrel.
The cheapest, but least reliable is considered to be a well made of old car tires. It requires high-quality waterproofing and is not suitable for bulk sewage. Brick construction is too time-consuming and also requires careful sealing.
Chambers made of cast concrete are durable and easy to maintain, but require knowledge of casting technology and masterful execution. Concrete rings are popular, but their installation requires construction equipment and additional working hands.
An alternative to a cesspool from a barrel is a well made of concrete rings. When installing it, attention must be paid to sealing joints between the rings and waterproofing the entire structure
The cesspool from the barrel is easy to install, easy to maintain and has a long service life. Especially good are modern plastic sewer tanks with stiffeners and a neck for service.
For temporary needs, a metal container, additionally treated with an anti-corrosion agent, is also suitable, but it will last no more than 4-5 years.
The choice of barrels for the device
In order for the cesspool to serve for a long time, does not require repair and possesses maximum functionality, when it is designed, two factors must be taken into account: the material of manufacture and volume. Let us dwell on each.
Types of containers by material
Tanks are selected based on two basic requirements for the material: strength and tightness. Metal and plastic barrels correspond to these qualities. Consider their advantages and disadvantages.
Both types are perfect for any type of soil. These are sealed containers without a filter bottom, so it makes no difference what is under the barrel - sand with high throughput or waterproof clay.
The type of soil will become important if you decide to build a more complex structure of 2 or 3 barrels, the last of which will serve as an absorbing well.
A variant of the device of a cesspool of two identical plastic barrels connected to each other by an overflow pipe. The main part of solid precipitation will settle in the first tank from the house
For a sealed tank, it is also unimportant where the aquifers are located. Proper observance of the installation technology of the cesspool guarantees safety for high groundwater. There is only one way for the waste that has got into the accumulator - to the tank of the sewer machine.
Thus, barrels made of metal and plastic combine leak tightness. If we talk about strength, then plastic products win. Modern types of plastic, designed for sewage tanks, can last up to 50 years, easily resist the effects of household chemicals, and are not susceptible to corrosion.
The light weight of the products allows you to install them yourself, without the involvement of special equipment, although for the most voluminous models it is better to rent a manipulator and hire a crew of workers
The only minus of plastic is freezing at very low temperatures, if the tank is close to the surface. The problem is solved by additional insulation.
Disadvantages of metal barrels:
- heavy weight, causing difficulties with transportation and installation;
- the inability to withstand corrosion that can violate the tightness;
- the need for additional processing on both sides;
- the high cost of new products.
We can conclude that the best option in terms of price / quality ratio is a plastic container specially made for sewage systems.
Calculation of the volume of the cesspool
The size of the barrel depends on the volume of wastewater, and their quantity, in turn, on the number of people living in the house and the availability of water consumption points. If a married couple periodically comes to the cottage who does not use either a washing machine or a bath, the amount of waste will be much less than a family of 4-5 people living in the house permanently.
The easiest way to calculate the capacity is to use the following formula:
The quantity of sewage per one person is very individual. In some houses there is neither a bath nor a shower, respectively, the volume of liquid will not exceed 0.5 m³
Suppose 3 people live in a house, each of which has 100 liters (on average) of sewage waste daily. Under the contract, the suckers come once a month (30 days). We get 3 x 100 x 30 = 9000 liters. Consequently, a sufficiently large tank of 9 m³ is required.
If you decide to use small containers, they will require several, but for the convenience of pumping and installation it is better to purchase one large tank.
Image Gallery
Photo from
Compact plastic barrel
Metal barrel for a small family
Two or more barrel cleaning system
Tanks for cesspools
Designing and choosing a scheme
In order to hedge against errors in the design of a cesspool for a summer residence or a small country house, it is better to draw up a small plan and draw a diagram indicating the dimensions of the barrel, foundation pit, trenches, pipes.
The list of necessary materials and tools must include:
- plastic barrel (eurocube, tank);
- pipes and fittings for the assembly of communications;
- tool for excavation (shovel with buckets, winch, wheelbarrow);
- backfill for arranging the bottom of the pit (pebbles, gravel, crushed stone, sand).
To determine the length of the pipeline, you need to measure the distance from the building (bathhouse, garage, guest house) to the intended installation location of the barrel.
The dimensions of the pit should correspond to the size of the tank, but do not forget to leave 0.3 m on each side for backfilling. You may have to level the bottom of the pit and strengthen it with concrete pouring or with a pre-prepared concrete slab.
There are several options for the construction of a cesspool from used containers (or barrels). The simplest is the installation of a single tank at a distance of 5-7 m from the house (closer is not recommended by sanitary standards). If there are several barrels, they are connected by an overflow pipe and an excavation pit is oblong.
The larger the volume of the barrel, the farther the distance of the installation site of the cesspool from the house and other important objects - wells, pools, ponds
A large number of pipe joints and sections of the junction of the pipeline to the barrels increases the risk of sewage into the ground, so it is necessary to consider an effective way to seal joints.
Step-by-step installation instructions
The purchase of a sealed plastic factory-made container equipped with a hatch and attachments makes it possible to skip one rather laborious step - waterproofing the structure.
This means that the installation process will be much faster, and additional funds for the purchase of bitumen mastic or other means for sealing will not be required.
The cycle of construction of a cesspool from a used metal barrel includes a number of standard steps:
Image Gallery
Photo from
The device of a cesspool for a country toilet will begin with the development of a pit. We divide its bottom into two parts. Under the barrel should be about 20-30 cm higher than the rest of
From the bottom, about a fifth of the barrel’s height and its “bottom” are “perforated”: we cut holes or drill so that the throughput is as in the photo
We fill the bottom of the pit with gravel, which will serve as a natural soil filter for the liquid component
On the step formed during the digging of the pit, put the barrel. The rest of the space is filled with coarse material, for example, slate fragments or large gravel
On top of the filter we built, we lay polyethylene to prevent the spread of odors and isolate the upper soil layers
We fill the foundation pit with a homemade cesspool with dumped soil during mining
At the bottom of the barrel pour a layer of gravel or small gravel, the thickness of the layer is about 20-30 cm
We ram the earth around the barrel. Everything, the rake is ready, it remains only to build a booth over it
Stage 1: Development of a pit for a homemade cesspool
Stage 2: Perforation of a metal barrel
Stage 3: Gravel Backfill
Stage 4: Installing the barrel and filling the space
Step 5: Laying Polyethylene on Top of the Soil Filter
Stage 6: Backfilling of the pit
Stage 7: Filling the bottom with a gravel filter
Stage 8: Tamping the land around the barrel
When installing a septic tank from a barrel with a sealed bottom and walls in the construction of a soil filter there will be no point. The stages in these cases are reduced: they simply install a large-capacity sealed container in the foundation pit and periodically call the sewage system.
The device of the pit and trenches
Digging and arranging a hole of the desired shape is the most difficult and lengthy stage. If the soil is clay, you will have to spend a lot of effort, if it is sandy, a collapse of the walls is possible, which should be temporarily fixed with a semblance of formwork. The earth raised up does not need to be transported far from the foundation pit, as part of it will be needed when backfilling.
For digging a large pit, it is better to hire a team of workers with a mini-excavator. The use of bulky equipment is a threat to country lawns and landings.
The shape of the factory tanks can be different - round, square and rectangular. Usually, the foundation pit is torn out, focusing specifically on the shape and size of the barrel or cube
When installed on loose subsiding and heaving rocks, the bottom of the pit is reinforced to give the structure greater stability. You can use a concrete slab as a base, or you can make a cement screed with a thick drainage layer.
If the screed is not required, the bottom is covered with a layer of rubble (gravel, broken brick, pebbles), on top of it is the same layer of coarse sand. An important requirement for the foundation is compaction and leveling.
If flood waters have been noted in the area of construction of a private sewage system or, according to drilling organizations, groundwater lies close to the surface, the barrel or group of plastic containers should be anchored. Those. the structure should be fastened with a polymer cable to the metal loops monolithic in the concrete slab so that the container does not “pop up” when watering is possible.
Together with the pit, trenches for sewer communications are also being prepared. The shorter they are, the more functional the system. Pipes do not lead on the surface, but are laid at a depth of at least half a meter so that they do not freeze when the temperature drops below zero. Accordingly, the depth of the trenches should be 20-30 cm below the level of soil freezing.
Installing a barrel in a pit
If the pit is prepared correctly, installation of the tank does not take much time. The plastic container is gently lifted and transferred to the bottom of the pit so that it is exactly in the center.
The location of the container relative to the surface of the earth is important. The tank is installed so that the top of the neck after filling by 20-25 cm rises above the ground
The barrel must be deployed so that the inlet for connecting the pipe is opposite it and coincides with the end of the pipe in height.
If there are several barrels, they are arranged in sequential order and connected by pipe segments, carefully sealing the joints. Even when using fittings of the right size, you should use high-quality sealant and process the places where the pipes adjoin the tank.
Connection and backfill
Together with the installation of the barrel, pipes are laid.Sewer drains will move by gravity, without the use of technical devices, so it is important to ensure a sufficient slope of about 1.5-2 cm per meter of pipe.
To connect the communications to the barrel, modern sewer tanks are equipped with a special pipe. If it is missing, you must independently cut a hole in diameter of the supply pipe.
If accurate calculations have been made previously, pipes and holes can be prepared in advance until the barrel is placed in the pit. There are two main openings - for connecting to the inlet pipe and for pumping out drains
When all the connections are completed, you can start backfilling. To stabilize the tank inside the pit, dry cement is added to the soil. After setting, it forms a strong protective ring, which serves as a protective barrier against ground movement.
Backfill is performed in layers, pouring 0.2-0.3 m of sand-cement mixture and tamping each layer. The soil above the sewer pipe does not need to be compacted tightly.
If the communications are long and have branches / connections, it is better to make technical wells at the places of intersections and turns of pipes. In case of blockages, they will help to quickly find the cause.
Finishing touch - decorating the neck with a hatch. The easiest way is to break up a small flower bed. However, do not forget about the regular pumping of accumulated waste by the waste trucks, that is, about the construction of a convenient access road.
The nuances of the device pits without bottom
A cesspool with a filter bottom is a type of ordinary cesspool. However, it is used exclusively for the collection and processing of gray effluents - water contaminated during cleaning, hygiene procedures, and cooking. It cannot be considered cumulative, because part of the sewage flows into the ground.
A gravel-sand cushion is used as a filter. The power of the filter in the pit with a filter bottom should be at least 1 m. Fill in such a way that there is a sand layer 30 to 40 cm thick at the base, which is enough to clean gray wastewater from a fine suspension.
Layers of gravel or crushed stone are located higher: first a fine fraction, then a large one. They hold large impurities and clarify the water. Thus, a multi-stage purification of wastewater disposed of in the soil is performed, where it is additionally processed in natural conditions.
So that the sewage liquid does not mix with groundwater, a pit without a bottom is arranged only where their level is quite low.
A more effective scheme of the device of a cesspool is a septic tank of two containers. In the first case, the mechanical separation of effluents occurs, in the second, anaerobic treatment and partial filtration
For the device of a cesspool without a bottom in sandy loam soils characterized by extremely low filtration properties, the lower part of the walls of plastic barrels is perforated. So increase the absorption area to speed up the recycling process. True, the solid sediment will gradually clog the holes, so cleaning barrels with holes will have to be done no less than simple drives.
A home-made collection point and partial wastewater treatment needs regular maintenance using biologically active products, which are described in the article we recommend.
Tips for those who are interested in the proper arrangement of the cesspool.
Video # 1. Theoretical preparation for the construction of a cesspool:
Video # 2. Equipment of plastic barrels:
Video # 3. Installation and insulation of the overall capacity:
Installation of a ready-made factory model is within the power of the owner of the cottage or country house, even if he had never before worked on the sewage system. However, before starting work, we recommend that you study the installation standards of the cesspool and seek the support of a professional with an engineering background.
Write about how you built a cesspool on your own summer cottage. Tell us about the nuances of operating an independent sewage treatment plant. Please leave comments and photos on the topic in the block under the text of the article.