In areas with private development, the lack of a central sewage system is not uncommon. Disposal of sewage is becoming a problem for home owners, and they increasingly prefer to equip their own treatment system. One of such solutions can be the Tver septic tank, which performs a full cycle of wastewater treatment.
But you must admit, before deciding to purchase a treatment plant, it is necessary to study the unit design, understand the principle of its operation, get acquainted with operational advantages and disadvantages. All these points are detailed in the article.
How the Tver cleaning station is arranged
Septic Tver is a local station for the complete treatment of domestic wastewater. The internal volume of the septic tank is divided into working chambers, in which sedimentation, mechanical separation and biodegradation of the liquid take place.
The main components of the system:
- housing;
- a system of dividing and semi-submersible partitions with holes and cutouts, thanks to which water flows from section to section;
- compressor;
- air pipelines with appropriate valves;
- aerators;
- airlifts;
- inspection hatches with insulation;
- inlet and outlet pipelines;
- ventilation (fan) riser.
There is practically nothing to break in the installation. The only volatile unit that ensures the operation of the installation, the compressor, is mounted in the house. Elements of the system are made of polymers, therefore they are not subject to corrosion and decomposition by microorganisms, and are resistant to aggressive environments.
A distinctive feature of the Tver septic tank is the transfusion of fluid from one section to another through openings or corner cutouts in the upper part of the partitions. There are no overflow pipes and pipelines, which eliminates the risk of their clogging and overflowing of chambers with drains (+)
In the system, runoffs alternately pass through six zones:
- Septic chamber, or primary sedimentation tank;
- Anaerobic bioreactor;
- Aerotank;
- Secondary sedimentation tank;
- Aerobic bioreactor (aerotank of the II stage);
- Tertiary sedimentation tank.
Bioreactors are filled with ruffled nozzles. Aerators are installed in the bottom of the aeration tank and aerobic bioreactor chambers.
Airlifts are located in the secondary and tertiary sedimentation tanks and are connected by a sediment pipe to the septic chamber.
Image Gallery
Photo from
What is a septic tank Tver
Reliability and tightness of the case
Station work in winter
Geological conditions for operation
Septic tank independence from additional equipment
Functional purpose of station sections
Complete odor neutralization
Hatches from the necks of the sewer station
What is a case?
A septic tank is a sealed container made of durable polypropylene. This structural material is not susceptible to corrosion and any kind of erosion, does not enter into a chemical reaction with substances contained in soil and sewage.
On the sides of the casing are horizontal reinforced stiffeners, which, combined with the elasticity of polypropylene, allow the tank to withstand the pressure of the soil.
When properly installed with the device around the foundation pit of a dense sand cushion, even frosty heaving and uneven extrusion of individual layers of soil will not harm the septic tank.
From the ends of the body, in the lower part, there are loading wings. They play the role of "anchors", preventing the structure from floating up with a high level of groundwater
The special shape of the tank - trapezoidal with a rounded smooth bottom - is convenient for maintenance. There are no dead zones inside the tank and the septic tank can be cleaned of sludge even with the help of nets. The working sections of the station are arranged alternately in the horizontal direction, so the tank is elongated and has a relatively small height.
This feature allows you to place a septic tank in the upper layers of the soil, which reduces the labor costs for earthwork and makes it possible to use the structure even with a very high aquifer.
In the upper part of the tank one or two inspection hatchways are made. Due to their large size, the Tver septic tank is one of the most easily maintained structures among the deep cleaning stations on the market.
Large inspection hatches make it easy to carry out routine inspections and, if necessary, get to any area and to any element of the treatment plant
The device bioreactors
Since considerable work in the treatment of sewage from pollution is carried out by microorganisms, it is necessary to provide optimal conditions for their growth and reproduction in the septic tank. It is this function that both bioreactors in the Tver septic tank perform.
A physical opportunity for biofilm formation is provided by bio-loading. Its main function is to create as large a free area as possible for the settlement of bacterial colonies with minimal intrinsic dimensions.
In bioreactors of the Tver wastewater treatment plant, ruff loading is used. Nozzles resemble the shape of an ordinary household ruff, for which they got their name.
The shape of the loading elements contributes to an increase in activated sludge and a uniform distribution of microflora. However, they do not clog like porous bio-loads.
The specific surface of the brush nozzles is 50-60 m2 / m3. Chemically stable polymeric materials from which they are made are absolutely safe for microorganisms and the environment.
The polymer fibers of ruffled nozzles are flexible and durable - they do not break or crumble under mechanical stress
In anaerobic bioreactor colonies of bacteria that live and reproduce without air access settle. For their livelihoods, a sufficient amount of organic matter is sufficient.
The aerobic bioreactor provides conditions for microorganisms living only in the presence of oxygen. For this, an aerator is installed in the tank.
What is an aerator?
An aerator is a device that saturates the contents of a septic tank with the active component of air - oxygen. In its simplest form, it is simply a perforated tube, on one side of which air is supplied under pressure, and on the other, a plug is installed.
Gas is squeezed out through openings and, in accordance with physical laws, rises up. Since the aerator is installed at the very bottom, the entire volume of the section is filled with air bubbles. Oxygen dissolves in water and allows aerobic bacteria to exist.
However, if the air supply stops, the liquid will begin to flow into the aerator pipe, which is unacceptable. Therefore, a special film is put on the nozzle. The air from the inside quietly passes through the micropores, forming tiny bubbles that saturate the water well with oxygen. Water does not leak back.
The aerator nozzle in septic tanks is covered with a perforated membrane with one-sided throughput. This prevents water from entering the aerator when the system shuts down.
How does this sewer system work?
The process is organized in flow mode - the fluid goes through all stages of gravity cleaning. Therefore, a power outage does not become a disaster - the compartments do not overflow and the station continues to function and perform high-quality cleaning for at least a day.
Such design features make it possible to effectively use the Tver septic tank both for summer cottages with seasonal or periodic use, and for a house with permanent residence.
In the tank, the effluents undergo four degrees of fine biological treatment.
Primary sedimentation and anaerobic fermentation
Through sewage pipes, sewage enters the primary sump, where sedimentation, mechanical separation takes place and treatment with microorganisms begins. Hydrobionts enter here together with effluents from the anaerobic bioreactor, as well as with activated sludge from the secondary and tertiary sedimentation tanks.
Under the influence of bacteria, large heavy structures break down, and the wastewater is stratified by specific gravity. Heavy, poorly soluble particles settle to the bottom, light fat fractions rise to the surface.
Sludge and grease film are also gradually processed, but this takes more time. As a result, only solid sediment remains, which should be pumped out.
The next section is the anaerobic bioreactor, where colonies of anaerobic bacteria are concentrated. Relatively clean water from the middle layer of the septic chamber enters here.
Due to the content of a large amount of organic matter, fermentation and sedimentation of sludge on the fibers takes place in the loading space. Hydrobionts break down difficultly oxidized and complex organic compounds to simple ones.
A similar separation process takes place in the primary clarifier of the treatment plant. The next section is already clarified liquid
Oxidation and aerobic decomposition of organics
Water with simple suspensions falls into the next section - aeration tank, where continuous aeration is carried out. In an oxygenated and nutrient-rich environment, aerobic bacteria begin to work. They use simple organics as food to maintain metabolism. As a result, the water is saturated with active suspensions.
A layer of gravel is poured onto the bottom of the aeration tank. Residues of bacterial activity (metabolites) settle on it, as well as some of the organics. Due to this, an environment is formed for the reproduction and growth of anaerobes and the formation of activated sludge occurs.
Together with air bubbles, it rises again, and bacteria continue to work throughout the chamber. Further, this “agitated” liquid enters the secondary sump. The process calms down, the particles settle.
The secondary sump and aeration tank are interconnected sections, therefore, activated sludge settling returns to the aeration tank chamber. The clarified water flows through the upper overflows - into the aerobic bioreactor.
In the bioreactor chamber, conditions have been created for the growth and reproduction of huge colonies of aerobes. Saturated with oxygen and organic residues, water passes through a ruffian bio-load, in which the same processes occur as in an aeration tank. Only much more active.
The lion's share of activated sludge settles on the fibers of ruffs and is processed by bacteria until complete decomposition.
Active sludge is a flake of gray, dark brown and dark gray - zoogley. These are clusters of living microorganisms and a solid carrier, covered with a common mucous membrane
Neutralization of toxic compounds
In addition to organic matter and insoluble heavy suspensions, domestic wastes contain toxic substances. Detergents and detergents used for bathing, washing, washing dishes or cleaning contain phosphates and nitrogen compounds.
They dissolve in water and do not settle, are not decomposed by bacteria. It is forbidden to drain water containing toxic compounds into the ground - this threatens a violation of the environment.
To neutralize them, a limestone layer is located in the bottom region of the bioreactor section. It reacts with phosphates and nitrogen compounds and forms insoluble salts that precipitate.
Finishing sedimentation and disinfection
The last stage of treatment is the settling of water in a tertiary sump. The remaining metabolites and neutral salts formed by the combination of phosphates and limestone settle here. As a result of passing through all chambers, the effluents are completely cleaned of pollution - the degree of purification is 98%.
The process of purification of household sewage consists of four degrees of purification: mechanical separation, fermentation and decomposition of complex substances into simple ones, oxidation and aerobic digestion of organics, final sedimentation and disinfection (+)
In a tertiary sump, almost pure water is disinfected. To do this, chlorine-containing tablets are placed in a special float.
Treated water can be discharged into relief and into a natural body of water. However, resource conservation trends are spreading not only in Europe, but also in our country.
Therefore, more and more economical owners use purified sewage a second time - for irrigation, for technical or household needs.
Image Gallery
Photo from
Absorbing sewer well
Drainage pipe system
Filtration field for water disposal
Discharge of treated water into the gutter
Disposal of excess activated sludge
With a sufficient amount of nutrients, the increase in the biomass of aerobic bacteria is very intense. In this case, a lot of activated sludge is formed. For disposal of its excess in the secondary and tertiary sedimentation tanks installed airlifts.
Airlift is a jet pump that lifts a fluid through compressed air. The design is very simple - it consists of two tubes and a compressor. One of the pipes is air under pressure. It is brought to the bottom of the second pipe, lowered into the water.
An air-water emulsion is formed - a liquid filled with air bubbles. Its specific gravity is less than the specific gravity of the surrounding water pipe.
Due to this, it rises up the pipe - denser water simply pushes a lighter air-water mixture. Suspensions contained in water also become part of the emulsion and successfully rise.
Two airlifts installed in the Tver septic tank, together with the liquid, raise excess activated sludge from the sections of the aeration tank and the tertiary sump. The mixture is pumped into the septic chamber through the sediment pipe. The cycle closes.
The more air bubbles there are in the mixture, the lighter it is. Accordingly, such a mixture rises better, and pumping is more efficient.
Advantages and disadvantages of the treatment system
Tver septic tanks have advantages and disadvantages, like any technical device. However, the number of advantages significantly outweighs, so these treatment facilities are widely and successfully used.
Design Advantages:
- Complete water purification takes place in one tank - no additional filtering devices are required.
- A septic tank with the right performance will purify effluents by 98% - this water can be discharged onto a relief, into a pond, and used for household needs.
- The septic tank case is made of high-strength polymer material that is not subject to corrosion and erosion, which ensures a long life of the device.
- There is no need to constantly use bioactivators - the bacteria in the septic tank recover independently and actively multiply.
- Purification from toxic phosphates and nitrogen compounds is provided.
- Solid sludge is pumped out once a year or less.
- The Tver Septic can be used even during intermittent operation - thanks to the combined cleaning method, the intermittent cycle does not create a large load on activated sludge and, in the absence of power supply, the septic tank goes into sleep mode.
- In a septic tank, the liquid does not move through the pipes or hoses, so there is no danger of clogging the system.
- The design quietly withstands salvo wastewater discharges without loss of treatment quality.
- Large inspection hatches make it easy to conduct routine inspections of the system, maintenance and pumping of solid sludge.
- The compressor is located indoors - this is convenient for maintenance and significantly extends the life of the unit.
- Compact overall dimensions and light weight allow you to install the Tver septic tank on your own, without involving special equipment.
Disadvantages:
- System volatility;
- The high price of the complex.
However, the rather high cost of a septic tank pays off already during installation - there is no need to construct absorption wells or spend money on arranging the filtration field.
Installation of a Tver treatment station is often performed on its own. This allows you to significantly save. The cost of this design does not exceed the amount that would have to be spent on the purchase and installation of a treatment system based on a simple septic tank
Modifications of treatment facilities “Tver”
Executions of Tver septic tanks are classified depending on their productivity - the amount of effluent that the plant is able to process within 24 hours. Select the required volume of the tank, taking into account the number of people constantly living in the house.
The performance of Tver station modifications on the market starts at 0.35 cu. m per day - this is suitable for 1-2 people. Next come the performances Tver-0.5P and Tver-0.75P - for 2-3 residents, Tver-0.85P - for 3-5 residents, Tver-1P - for 4-6 inhabitants, etc.
The letter "P" in the designation means that the septic tank is made in a plastic case.
The maximum daily processing volume for a septic tank with a plastic housing has a modification Tver-3P. This design can serve up to 18 people.
Septic tanks with a higher productivity belong to the professional class, their body is made of steel. The productivity of such structures is from 4.5 to 500 cubic meters. m per day.
Available with pump compartments. The section with the pump may be the last one along the septic tank. Such modifications have the letter “H” at the end of the cipher designations - for example, Tver-1,5PN.
Pumping units are used for forced removal of purified water to the terrain or to the well when the level of the discharge pipe is higher than the outlet from the septic tank.
There are models with a pump compartment, which is located in front of the receiving chamber - the primary settler. The sewage pump pumps sewage into the septic chamber in the case when the trunk leaving the house is located quite low underground - below 60 cm it is the surface level.
Septic tanks with a pump are marked with the letter “H” at the beginning of the cipher of the designation - Tver-1NP.
There are also combined installations - their designation has the code of the NPN. For example, performance Tver-2NPN.
The option of using a septic tank with a pump compartment is optimal if the site has a very high groundwater level. Digging a deep drainage ditch in this case does not make sense. The discharge of purified water occurs on the surface of the soil (+)
If the issue of septic tank selection is still relevant, we suggest that you read the article - Which septic tank is better for home: a comparison of popular treatment plants
The device and principle of operation of the septic tank Tver:
The device and operation of the Tver septic tank, its advantages in comparison with other systems. Winter Conservation Tips:
Septic tank “Tver”, due to its versatility, is used for private houses and summer cottages located in areas with any type of soil. More productive designs are suitable for the disposal of wastewater from small production sites and storage facilities remote from central utilities.
Share with your readers your experience using the Tver septic tank. Please tell us about the features of its maintenance and operation. Participate in discussions and ask your questions - the comment block is located below.